The price stated is for 1 meter. The maximum pipe length is 12 meters. If there's a need for a longer pipe, for instance 15 metres, you have to mention the required length in your order, for example, 9+6m or 8+7m.
In StockThe price stated is for 1 meter. The maximum pipe length is 10 meters. If there's a need for a longer pipe, for instance 15 metres, you have to mention the required length in your order, for example, 9+6m or 8+7m.
In StockIn Stock
The heating device is independent heating unit that consists of: -heater 2kW(MOUNTAIN KIT);-silent fuel pump;-exhaust pipe Ø24mm (1 meter);-isolation (0,45 meter);-exhaust silencer;-cable for pump;-cabel for control panel (1,8 meter)-fuel standpipe;-cable for battery(6,5 meter ). Planar 2D is the model with the smallest dimensions in...
In StockThe price stated is for 1 meter. The maximum pipe length is 8 meters. If there's a need for a longer pipe, for instance 12 metres, you have to mention the required length in your order, for example, 6+6m or 8+4m.
In StockFeature Comparison PU-5 PU-28 Comfort ControlPower mode ✓ ✓ ✓Temperature mode ✓ ✓ ✓Ventilation mode ✓ ✓ ✓Heating + Ventilation mode ✓ ✓ ✓LED status ✓✓Built in temperature sensor✓ ✓Timers✓ ✓Display✓ ✓Touchscreen function...
In StockControl panel for Planar 2d,44d,8d.
In Stock
An additional external heat sensor. It turns off the heating system when reaching the room temperature 5 degrees Celsius over the pre-set temperature on the control panel and turns on the heating system when the room temperature has descreased by 5 degrees Celsius in comparison with the pre-set value.
In StockThe installation plate makes the heater mounting on the floor easier as it allows to make a hole of a greater dimension.
In StockThe heat insulation of the exhaust pipe 24 mm. The length is 1m.
In StockThe T shape bend is intended to be used with the air pipe 60 mm.
In StockThe T shape bend is intended to be used with the air pipe 75 mm.
In StockThe adaptor-reduce for Planar 44d is necessary for connecting the air pipe 75 mm with the heating system
In StockThe Y shape bend is intended to be used with the air pipe 60 mm.
In StockThe bracket is L-shaped and is required to fasten the heater to the wall. Size 140mmx250mm. Stainless steel N. 1.4404
In StockThe heating device is independent heating unit that consists of: -heater 4kW (MOUNTAIN KIT);-silent fuel pump ;-exhaust pipe Ø24mm (1 meter);-isolation (0,45 meter);-exhaust silencer;-cable for pump;-cabel for control panel (1,8 meter)-cable for battery(6,5 meter )-fuel standpipe. This model provides maximum comfort in cabins and...
In StockPlastic fuel tank 7 L in a set with a bracket and a connecting pipe. Used for pre-heaters and air heaters. The tank is made from highly durable, fuel resistant low-density polythene. A set includes a lid-stopper, a bracket, a fuel connecting pipe.
In StockThe maximum pipe length is 10 meters. If there's a need for a longer pipe, for instance 15 metres, you have to mention the required length in your order, for example, 9+6m or 8+7m.
In StockThe heating device is independent heating unit that consists of: -heater 2kW (MOUNTAIN KIT),-silent fuel pump;-exhaust pipe Ø24mm (1 meter);-isolation (0,45 meter);-exhaust silencer;-cable for pump;-cabel for control panel (1,8 meter)-cable for battery(6,5 meter )-tank 7L. This kind of a heater is on sale in a set together with a...
In StockThe Y shape bend is intended to be used with the air pipe 75 mm.
In StockMounting box for Webasto 2000,Eberspächer d2 or Planar 2d. Size :36,00 × 14,60 × 13,00 cm. Protective container prevents the heater from mechanical damages and protects from aggressive environment.
In StockThe heat insulation of the exhaust pipe 24 mm. The length is 0,45m.
In StockThe cable substitutes the standard cable (1.8 m) from the heating assembly set.
In StockIsolation fits for 24mm/38mm. Price for 1 meter.
In StockThe heating device is independent heating unit that consists of: -heater 4kW;-silent fuel pump;-exhaust pipe Ø24mm with silencer (2 meter);-isolation (1,8 meter);-cable for pump;-cabel for control panel (7 meter);-cable for battery(6,5 meter );-fuel standpipe;-bracket is L-shaped;-exhaust hull fitting 24mm. This set is designed to be...
In StockClamp for fuel pump with rubber gasket, for all Autoterm metering fuel pumps.
In StockThe heating device is independent heating unit that consists of: -heater 4kW (MOUNTAIN KIT);-silent fuel pump;-exhaust pipe Ø24mm (1 meter);-isolation (0,45 meter);-exhaust silencer;-cable for pump;-cabel for control panel (1,8 meter)-cable for battery(6,5 meter )-fuel standpipe;-T-fuel tube;-tank 7l. This model provides maximum...
In StockThe Exhaust silencer is intended to reduce the noise when using the air pipe 60 mm. Length 420mm.
In StockThe heating device is independent heating unit that consists of: -heater 2kW (MOUNTAIN KIT),-silent fuel pump;-exhaust pipe Ø24mm (1 meter);-isolation (0,45 meter);-exhaust silencer;-cable for pump;-cabel for control panel (1,8 meter)-fuel standpipe;-cable for battery(6,5 meter ). Planar 2D is the model with the smallest dimensions...
In StockProtective container prevents the heater from mechanical damages and protects from aggressive environment. Dimensions 44,00 × 16,80 × 16,80 cm.
In StockGasket repair kit, suitable for all modifications of air heaters AUTOTERM Air 4D.
In StockThe control panel is designed for:• manual start and shutoff of the product;• manual start and shutoff of the pump (for the pre-heater);• manual start and shutoff of ventilation (for the heater);• fluid temperature display (for the pre-heater)• power supply voltage display;• current time and operating time display;• activation of the...
In StockThis hook keeps the two parts of the heater cases. Each heater has 4 hooks. The hook is suitable for all modifications of AUTOTERM Air 2D & AUTOTERM Air 4D.
In StockThe Exhaust silencer is intended to reduce the noise when using the air pipe 75 mm.
In StockThe air intake tailpiece is necessary for an air intake for the combustion when assembli ng the heating on a boat. The assembling of the heating in limited space without circulating air can lead to the lack of air necessary for heating and combustion. That might cause an overheating of the heating system and the creation of soot in the...
In StockThe Exhaust silencer is intended to reduce the noise when using the air pipe 90 mm. Long 650mm.
In StockSilent metering fuel pump. Suitable for Air 2D & Flow 5D / 5B. 100 tick dose: 4.4 ml. Voltage: 12V.
In StockDiameter: ID Ø 24 mm / OD Ø 32 mm & 52 mm. Pipe length 65 cm. Silencer length 18 cm. For Air 2D, 4D, Flow 5D.
In StockThe heating unit Binar 5 for pre-heating of engines before their starting was developed for installation in passenger cars and designed for:-heating of engines for safe putting them into operation at low temperatures;-heating of cabins and front glass/windshield (for deicing) when the engine is stopped;-additional heating of the engine...
In StockThe heating device is independent heating unit that consists of: -heater 2kW;-silent fuel pump;-exhaust pipe Ø24mm (1 meter);-isolation (1 meter);-exhaust silencer;-cable for pump;-cabel for control panel (7 meter);-cable for battery(6,5 meter);-bracket is L-shaped;-exhaust hull fitting 24mm. This set is the perfect choice for...
In StockGlow plug suitable for all modifications of the following air heater: AUTOTERM Air 2D-12. Voltage: 12V.
In StockThe maximum pipe length is 10 meters. If there's a need for a longer pipe, for instance 15 metres, you have to mention the required length in your order, for example, 9+6m or 8+7m.
In StockThe maximum pipe length is 10 meters. If there's a need for a longer pipe, for instance 15 metres, you have to mention the required length in your order, for example, 9+6m or 8+7m.
In StockRubber seal for the combustion chamber fuel line. For AUTOTERM Air 4D, Air 8D & Flow5, Flow 14D.
In StockVoltage: 12V Thermal power: 1700W Airflow: 110 m3 / h Power consumption: 7W Fan noise: 48 db Hot water pipe: 16mm Weight: 1 kg
In Stock